Previous Article | Next Article ![]()
Journal of Clinical Microbiology, July 2003, p. 3379-3383, Vol. 41, No. 7
0095-1137/03/$08.00+0 DOI: 10.1128/JCM.41.7.3379-3383.2003
Eastern Regional Research Center, Agricultural Research Service, U.S. Department of Agriculture, Wyndmoor, Pennsylvania 19038,1 Gastroenteric Disease Center, Department of Veterinary Science, Pennsylvania State University, University Park, Pennsylvania 168022
Received 2 January 2003/ Returned for modification 19 February 2003/ Accepted 14 April 2003
|
|
|---|
|
|
|---|
Shiga toxin-producing E. coli O121 strains are classified as enterohemorrhagic E. coli (EHEC), since they have been isolated from patients with hemorrhagic colitis or HUS (3, 11, 12, 18, 24, 25). Additionally, strains of E. coli O121 serogroup, possessing virulence characteristics similar to those of Shigella and enteroinvasive E. coli, have caused shigellosis-like illnesses (8, 10). In 1999, E. coli O121:H19 was associated with an outbreak of HUS at a lake in Connecticut (11). Due to the public health concern over E. coli O121 infection, assays specific for this serogroup are needed to rapidly and reliably detect this pathogen and to further define its role in causing human illness. Tarr et al. (19) characterized 24 isolates of E. coli O121:H19 and nonmotile variants using multilocus enzyme electrophoresis and multilocus sequencing and found that the isolates represented a single bacterial clone. The isolates possessed a virulence gene profile typical of EHEC clones; however, the results of sequencing analyses showed that the O121:H19 clone did not fall into any of the classical EHEC or enteropathogenic E. coli groups. Tarr et al. suggested that E. coli O121:H19 independently acquired virulence genes and represents a distinct EHEC clone.
The O antigen is the surface polysaccharide side chain of lipopolysaccharide present in gram-negative bacteria, and the H antigen is found on the flagellar protein. Typing E. coli isolates is traditionally performed by serotyping, which relies on agglutination reactions using antisera raised against the 179 O and 56 H serogroup antigens. Serotyping, however, can generally only be performed in specialized laboratories, is labor-intensive, and may require several days to complete, and cross-reactivity of antisera with multiple O or H serogroups frequently occurs. Characteristically, genes specific to O-antigen synthesis are located in the O-antigen gene cluster between the galF and gnd genes on the E. coli chromosome. Determination of the sequence of the genes in the cluster permits identification of unique genes or sequences that can be used to design serogroup-specific PCR assays. These assays can be employed for detection, as well as typing, of E. coli as an alternative to serotyping. Several O-antigen gene clusters have been sequenced, including O55, O91, O104, O111, O113, and O157, and serogroup-specific PCR assays based on genes in the respective O-antigen clusters have been developed (15, 16, 20-23). In the present study, the O-antigen gene cluster of an E. coli serogroup O121 strain was sequenced, and PCR assays using primers based on the wzx and wzy genes in the cluster were designed and used to detect E. coli O121 strains in swine feces.
E. coli O121:H19 strain 96-1585, obtained from the Health Canada Laboratory Centre for Disease Control, Ottawa, Ontario, Canada, was used for sequencing. The PCR results targeting the stx1 and stx2 genes showed that this strain harbors only stx2 (data not shown). Bacteria used to test for specificity of the PCR included 99 E. coli serogroup O121 strains and one or more representative strains from each of the remaining different E. coli serogroups isolated from humans, animals, food, and water. These serogroups included E. coli serogroups O1 to O173, excluding O14, O31, O47, O67, O72, O93, O94, and O122, since these serogroup designations have been eliminated (13) and OX3, OX6, OX7, OX9, OX10, OX13, OX18, OX19, OX21, OX23, OX25, OX28, OX38, and OX43. In addition, strains representative of other bacterial genera including Shigella (three Shigella sonnei strains, three Shigella flexneri strains, two Shigella boydii strains, and two Shigella dysenteriae strains), Salmonella (three Salmonella enterica serovar Typhimurium strains, one S. enterica serovar Enteriditis strain, and one S. enterica serovar Worthington strain), Yersinia (one Yersinia enterocolitica strain), Vibrio (one Vibrio cholerae strain), Pseudomonas (one Pseudomonas fluorescens strain), Erwinia (one Erwinia carotovora strain), Serratia (one Serratia liquefaciens strain), Klebsiella (one Klebsiella pneumoniae strain), Citrobacter (two Citrobacter freundii strains and one Citrobacter braakii strain), and Listeria (one Listeria monocytogenes strain) were tested. The bacteria were from the strain collections at the Gastroenteric Disease Center at Pennsylvania State University in State College and the Microbial Food Safety Research Unit at the Eastern Regional Research Center in Wyndmoor, Pa.
Sequence and analyses. E. coli O121:H19 strain 96-1585 was grown for 18 h in Luria-Bertani broth (Difco, Detroit, Mich.) at 37°C, and genomic DNA was extracted using the High Pure PCR template preparation kit (Roche Applied Science, Indianapolis, Ind.). Long PCR was performed using the Expand Long Template PCR system (Roche Applied Science) and JUMPSTART (named for just upstream of many polysaccharide-associated gene starts) and 6-phosphogluconate dehydrogenase (GND) primers (23), resulting in a ca. 15,000-bp PCR product. The JUMPSTART sequence is a conserved 39-bp region present upstream of a number of polysaccharide gene clusters, and the gnd locus, which encodes an enzyme of the pentose phosphate shunt, GND, is found downstream of the O-antigen gene clusters of E. coli and Salmonella. The JUMPSTART sense primer sequence was 5'-ATTGGTAGCTGTAAGCCAAGGGCGGTAGCGT-3', and the GND antisense primer was 5'-CACTGCCATACCGACGACGCCGATCTGTTGCTTGG-3' (Invitrogen, Carlsbad, Calif.).
The PCR mixture consisted of 5 µl of 10x buffer 2, 0.5 mM each of the four deoxynucleotide triphosphates (dNTPs), 0.4 µM each of the JUMPSTART and GND primers, 0.75 µl of enzyme mix, and 15 µl of template DNA. The PCR was performed in a GeneAmp PCR System 9600 thermal cycler (Applied Biosystems, Foster City, Calif.) using a total reaction mixture volume of 50-µl. The temperature cycling protocol consisted of the following steps: (i) an initial step of 2 min at 94°C; (ii) 30 cycles, with 1 cycle consisting of 10 s at 94°C, 30 s at 60°C, and 15 min at 68°C; and (iii) a final extension step of 7 min at 68°C.
The long PCR products were cleaned using the Quickstep II PCR purification kit (Edge Biosystems, Gaithersburg, Md.), and all of the DNA was used in a single DNase I digestion experiment. DNase I digestion was performed using the DNase Shotgun cleavage kit (Novagen, Madison, Wis.) according to the manufacturer's instructions. The DNA sized from 2 to 3.5 kb was excised from each lane of an agarose gel using a scalpel and purified from the gel using the QIAEX II gel cleanup kit (Qiagen, Valencia, Calif.). The DNA from a single lane was resuspended in 19 µl of water. Using the Single dA cloning kit (Novagen, Madison, Wis.), the flushing reaction was performed, followed by the single A tailing reaction. After end tailing was finished, the enzymes were deactivated by incubation at 70°C for 20 min, and the DNA was then extracted with 75 µl of chloroform. Ligations were performed following the manufacturer's instructions using the pGEM-T Easy kit (Promega, Madison, Wis.). The pGEM-T vector contains single 3'-T overhangs at the insertion site.
Transformation of ligated DNA into library-efficiency, chemically competent E. coli DH5
cells was performed using the manufacturer's instructions (Invitrogen). Plasmids were purified using a Qiagen BioRobot 9600 and Qiagen 96 Turbo protocol. The plasmids were sequenced using an Applied Biosystems 3700 automated DNA sequencer and the Big Dye Terminator sequencing kit (Applied Biosystems). One hundred ninety-two clones were sequenced (two 96-well plates). The sequence data were imported into Sequencher software (Genecodes, Ann Arbor, Mich.) for quality assessment, vector trimming, and assembly. Primers were designed to fill gaps not covered by the random shotgun clones, and PCR products were sequenced until all gaps were filled. The assembled sequences were imported into Artemis (17), the open reading frames were located, and the putative coding regions were analyzed using the National Center for Biotechnology Information (NCBI) BLASTP program against the nonredundant database (1).
Fourteen open reading frames were identified as encoded by the 15,155-bp O-antigen gene cluster of E. coli O121 with all having the same postulated transcriptional direction (GenBank accession no. AY208937). The genes within the cluster, identified with various degrees of precision, are shown in Table 1. There were seven transferase genes and O-antigen flippase (wzx) and O-antigen polymerase (wzy) genes. The putative wzx ORF of E. coli O121:H19 strain 96-1585 had only 21% identity with the published homolog of E. coli O55:H7, and the wzy ORF of E. coli O121:H19 had 20% identity with wzy of E. coli O7:K1. Open reading frame 6 had 35% identity with a hypothetical protein from Bordetella, so the function of this gene in E. coli O121 is currently unknown. Gene names were assigned on the basis of the Bacterial Polysaccharide Gene Nomenclature scheme (http://www.microbio.usyd.edu.au/BPGD/big_paper.pdf).
|
View this table: [in a new window] |
TABLE 1. Summary of genes in E. coli O121 O-antigen gene cluster
|
4)-
-D-GalpNAcAN-(1
4)-
-D-GalpNAcA-(1
3)-
-D-GlcpNAc-(1
3)-ß-D-Quip4NAcGly-(1
and having an O-acetyl group located on O-3 of the GalNAcAn. The only difference between the chemical structures of the O antigen of S. dysenteriae type 7 and that of E. coli O121 was that O acetylation in the repeating unit of S. dysenteriae type 7 was stoichiometric (14). The structure of the E. coli O121 repeating unit was not confirmed in this study using E. coli O121:H19 strain 96-1585. Selection of PCR primers and specificity testing. In other studies, PCR assays using primers based on the wzx and wzy genes were serogroup specific (20, 21, 23). Sequence similarity analyses were performed comparing the E. coli O121 wzx and wzy genes to similar genes in other E. coli serogroups, and results demonstrated that there were unique regions in the E. coli O121 genes. Therefore, two sets of oligonucleotide primers complementary to each of the genes were designed and used in PCR assays to determine the specificity for E. coli O121 (Table 2). The PCR testing was performed at the Gastroenteric Disease Center. Template DNA from the bacteria was prepared by mixing a colony in sterile distilled water and heating at 100°C for 20 min. The PCR was performed in a RapidCycler (Idaho Technology, Inc., Salt Lake City, Utah) using total reaction mixture volumes of 11 µl. The PCR mixture consisted of 3 µl of template DNA, 0.5 µM (each) primers (Integrated DNA Technologies, Inc., Coralville, Iowa) (Table 2), 0.18 mM each of the four dNTPs, 3.0 mM MgCl2, 0.4 U of Taq DNA polymerase (PGC Scientifics, Frederick, Md.), 50 mM Tris (pH 8.3), 250 µg of bovine serum albumin per ml, 2% sucrose, and 0.1 mM cresol red (Idaho Technology, Inc.). One primer set was used for each of the PCR assays. The thermal cycling protocol was performed using the rapid cycle DNA amplification method and consisted of the following steps: (i) an initial denaturation step of 30 s at 94°C; (ii) 30 cycles, with 1 cycle consisting of template denaturation at 94°C for 0 s, primer annealing (at 57°C for 0 s for the O121wzx1 and O121wzx2 primer sets, 63°C for 0 s for the O121wzy1 set, and 58°C for 0 s for the O121wzy2 set), and primer extension at 72°C for 13 s, and a final extension step of 30 s at 72°C. The PCR products were visualized following electrophoresis through 1% agarose gels stained with ethidium bromide.
|
View this table: [in a new window] |
TABLE 2. Oligonucleotide primers used for amplification of the E. coli O121 wzx and wzy genes
|
![]() View larger version (66K): [in a new window] |
FIG. 1. Agarose gel showing PCR results of DNA from seven E. coli O121-positive swine fecal samples using two primer sets for the wzx gene and two primer sets for the wzy gene. (I) Lanes 1 to 7 and 8 to 14, PCR products using DNA from isolates K84-9 O121:H10, K84-11 O121:H10, K84-12 O121:H10, K84-36 O121:H10, K84-40 O121:H10, K102-27 O121:H-, and K150-1 O121:H-, respectively, and primer sets O121wzx1F-O121wzx1R (A) and O121wzx2F-O121wzx2R (B). Lanes 15 to 20 and 21 to 26, PCR products using DNA from E. coli O103:H3 93-0626, C. freundii ATCC 33128, C. braakii ATCC 43162, E. coli O111:NM 91.0130, S. flexneri ATCC 12022, and E. coli O121:H19 96-1585, respectively, and primer sets O121wzx2F-O121wzx2R and O121wzx1F-O121wzx1R, respectively. (II) Lanes 1 to 7 and 8 to 14, PCR products using DNA from the same swine fecal isolates described above for panel I and primer sets O121wzy1F-O121wzy1R (A) and O121wzy2F-O121wzy2R (B), respectively. Lanes 15 to 20 and 21 to 26, PCR products using DNA from E. coli O121:H19 96-1585, E. coli O103:H3 93-0626, C. freundii ATCC 33128, C. braakii ATCC 43162, E. coli O111:NM 91.0130, and S. flexneri ATCC 12022, respectively, and primer sets O121wzy1F-O121wzy1R and O121wzy2F-O121wzy2R, respectively. Lanes M, 100-bp ladder molecular size standards (Invitrogen).
|
The PCR was performed in a GeneAmp PCR system 9600 thermal cycler (Applied Biosystems) using a total reaction mixture volume of 50 µl. The PCR mixture consisted of 5 µl of template DNA, 0.5 µM (each) primer (Invitrogen), 0.2 mM each of the four dNTPs, 3.0 mM MgCl2, 1.25 U of Taq DNA polymerase (Invitrogen), 20 mM Tris-HCl (pH 8.4), and 50 mM KCl. The thermal cycling protocol consisted of the following steps: (i) an initial denaturation step of 2 min at 94°C; (ii) 35 cycles, with 1 cycle consisting of 20 s at 94°C, annealing (1 min at 60°C), and extension (1 min at 72°C); and (iii) a final extension step of 10 min at 72°C. The PCR products were visualized following electrophoresis through 1.5% agarose gels stained with ethidium bromide.
All seven swine fecal enrichment samples that contained E. coli O121, determined by colony hybridization using DNA probes complementary to the stx1 or stx2 gene and serotyping of the isolates, were positive by PCR using the four primer sets designed in this study for amplification of portions of the wzx and wzy genes in the O-antigen gene cluster of E. coli O121 (Fig. 1). The strains and serotypes of the seven isolates follow: K84-9 O121:H10, K84-11 O121:H10, K84-12 O121:H10, K84-36 O121:H10, K84-40 O121:H10, K102-27 O121:H-, and K150-1 O121:H-. In addition, to rapidly identify an isolate as an enterohemorrhagic E. coli O121 strain, multiplex PCR assays targeting the Shiga toxin genes and genes in the O121 O-antigen gene cluster can be employed. This type of identification cannot easily be performed using serotyping methods.
In conclusion, in addition to providing information regarding the evolution of the O-antigen locus genes in E. coli and correlating chemical diversity with the genetic diversity (22), the DNA sequences of the genes in the O-antigen gene clusters can be utilized to design PCR-based assays for the detection or identification of specific E. coli serogroups. In this study, PCR assays were developed to detect or identify E. coli serogroup O121 on the basis of the wzx and wzy genes in the E. coli O121 O-antigen gene cluster. The PCR assays were used to detect E. coli O121 in swine fecal samples. Thus, use of the PCR assays provides the ability to detect, identify, and type this serogroup, eliminating the use of the more labor-intensive serotyping procedure.
|
|
|---|
This article has been cited by other articles:
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Copyright © 2009 by the American Society for Microbiology. For an alternate route to Journals.ASM.org, visit: http://intl-journals.asm.org | More Info»